Canon PIXMA MP830 - Manual (Page 140)

138 Chapter 9 Changing the Machine Settings
z Date display
Sets the format of dates displayed on the LCD and printed on sent faxes.
Three date formats are available; , , and
z Summer time setting
Enables/disables the summer time setting.
z Unit name/TEL registr.
Registers the sender information (your name and fax/telephone number) printed on sent faxes.
z TTI position
Sets the sender information printed at the top of each fax page.
z Offhook alarm
Sets whether to set off an alarm when the handset is off hook.
z Volume control
Adjusts the volume of the dialing sound.
z RX ring level
Adjusts the ring level when the machine receives a fax.
z Telephone line type
Specifies the type of telephone line connected to the machine ( or ).
z Activity report
Sets whether to print the Activity report automatically after every 20 transactions.
„ TX settings
z ECM TX
Enables/disables ECM sending.
z Pause time
Sets the length of time paused for each press of [Redial/Pause].
TTI position Selects the position to print the sender information (outside or
inside the image area).
FAX/TEL number mark Selects the prefix inserted before the fax/telephone number
( or ).
Note
In New Zealand, select . You cannot use .