Canon PIXMA MP830 - Manual (Page 124)

122 Chapter 5 Faxing
2
Display the Receive mode settings screen.
(1) Use [ ] or [ ] to select , then press [OK].
3
Select a receive mode.
(1) Use [ ] or [ ] to select a receive mode, then press [OK].
The receive mode will be displayed on the LCD.
„ Canceling Receiving
Press [Stop/Reset] and follow any instructions on the LCD.
„ Memory Receiving
If ink has run low while receiving a fax, if the paper size setting is incorrect, or if the paper type is
set to a type other than plain paper, the fax is automatically stored in memory and memory.> is displayed. When the ink tank is replaced or the paper size/type setting is corrected,
the stored fax is printed automatically.
Note
For details on the receive modes, see “Receive Modes” on page 119 .
Note
z The machine can store up to approximately 250 pages* of faxes in memory.
z If the memory becomes full, the machine cannot receive any more faxes. Print or delete
the documents stored in memory, and then contact the sender and have him/her resend
them.
* When using ITU-T No.1 chart (Standard mode)
(1)