Canon PIXMA MP830 - Manual (Page 137)

Chapter 9 135 Changing the Machine Settings
(2) Use [ ] or [ ] to select the menu, then press [OK].
Example: select .
5
Change the settings.
(1) Use [ ] or [ ] to select the setting item, then press [OK].
Example: select .
The Print Settings
„ Quiet mode
Use this function if you want to reduce the operation noise, such as when printing at night.
„ Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
„ Extended copy amount
Selects the amount of image that extends off the paper when printing in Borderless (full).
„ Auto cont. feed switch
If paper runs out in one paper source, paper will be fed from the other.
Important
z The printing speed may be reduced compared to when this setting is set to .
z This function may not be so effective depending on the print quality setting.
z Furthermore, certain noise, such as when the machine is preparing for printing, is not
reduced.
Important
Be sure to revert this setting to after printing since it may result in lower print quality.
Note
z This setting can be applied only when Copy mode selected.
z If you set for this function, the area of the image extending off the paper becomes
larger.
(2)
(1)