Canon PIXMA MP830 - Manual (Page 19)

Chapter 1 17 Before Printing
(14) Auto Sheet Feeder Lamp
Lit when the Auto Sheet Feeder is selected.
(15) Cassette Lamp
Lit when the Cassette is selected.
(16) [Feed Switch]
Selects the paper source. Press this toggle switch to change the paper source between
the Auto Sheet Feeder and Cassette.
(17) [Photo Index Sheet]
Switches to Photo Index Sheet mode. See “Printing by Using the Photo Index Sheet” on
page 66 .
(18) [Enlarge/Reduce]
Sets the enlargement or reduction ratio for copying.
(19) [Search]
Looks up target photos in the memory card using the shooting date as the search key.
See
“Searching for Photos with the Shooting Date (Search)” on page 59 .
(20) [Two-Sided]
Specifies settings for .
(21) [FAX Quality]
Sets the resolution of the fax you are sending.
(22) [Back]
Allows you to return to the previous screen.
(23) [OK]
Finalizes your selection for the menu or setting item.
Restores the machine to normal operation after a printing error was resolved, or if paper
jams are cleared. Ejects documents remaining in the ADF.
(24) [ ] [ ] [ ] [ ]
Scroll through menu selections, and increase or decrease the number of copies. You can
use these buttons when <
>, < >, < >, and < > are displayed on the LCD. Also
[ ] cancels the entered character, and [ ] enters a space between characters when
entering characters.
(25) [Trimming]
Use to crop the photo that is displayed. See “Printing a Specified Area (Trimming)” on
page 60 .
(26) [Tone]
Switches temporarily to tone dialing. Also changes the mode when entering characters.
(27) [Redial/Pause]
Redials the last dialed number using Numeric buttons. Also enters pauses between or
after numbers when dialing or registering numbers.
(28) [Coded Dial]
Press this button and a two-digit code to dial a pre-registered fax/telephone number or
group.
(29) [Hook]
Engages or disengages the telephone line.
(30) [Black]
Starts black & white copying, scanning, or faxing.
(31) [Color]
Starts color copying, photo printing, scanning, or faxing.