Canon PIXMA MP830 - Manual (Page 110)

108 Chapter 5 Faxing
„ Sending Methods
There are four methods of sending faxes:
z Sending from your machine (Memory sending)
z Sending manually from your machine
z Sending to multiple recipients from your machine in one operation (Sequential broadcasting)
z Sending from your computer
This section describes how to use these methods.
z Sending From Your Machine (Memory Sending)
1
Prepare for faxing.
(1) Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 18 .
(2) Load the document on the Platen Glass or the ADF.
(3) Press [FAX].
(4) Adjust fax settings as necessary.
See “Before Sending Faxes” on page 106 .
2
Start faxing.
(1) Dial the recipient’s number using the Numeric buttons or speed dialing.
(2) Press [Color] for color sending, or [Black] for black & white sending.
z When the document was loaded on the Platen Glass:
(3) When the following message is displayed, load the next page on the Platen Glass.
If you have only one page of document to scan, go to step (6).
(4) Press [Color] or [Black].
(5) Repeat steps (3) and (4) to scan in all pages of the document.
(6) Press [OK].
Important
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
Note
For details on document requirements and how to load documents, see “Loading
Documents to Copy, Fax, or Scan” on page 19 .
Note
For details on how to use speed dialog, see “How to Use Speed Dialing” on page 111 .