Canon PIXMA MP830 - Manual (Page 20)

18 Chapter 1 Before Printing
Turning the Machine ON and OFF
Turn on the machine before starting printing.
„ Turning on the Machine
Before turning on the machine, confirm that the Print Head and ink tanks are set into place.
1
Press [ON/OFF].
[COPY] flashes green for a while, and then turns on.
„ Turning off the Machine
1
To turn off the machine, press [ON/OFF].
The machine is off when the currently selected Mode button (e.g. COPY) stops flashing and
all Operation Panel lamps are off.
Note
If preparatory operations above are not yet finished, follow the Easy Setup Instructions to
complete them.
Note
If the Alarm Lamp lights or flashes orange and an error message is displayed on the LCD, see
“An Error Message is Displayed on the LCD” on page 161 .
Important
When removing the power plug after turning off the machine, be sure to check that all the
lamps on the Operation Panel are not lit. If the power plug is removed from the wall outlet with
the lamps on the Operation Panel lit or blinking, the machine cannot protect its Print Head and
may be unable to print.
See “Keeping the Best Printing Results” on page 147 .
Note
The power cannot be turned OFF while the machine is sending or receiving a fax, or when
there are unsent faxes stored in the machine's memory.