Bio-Rad Model 680 Microplate Reader Accessories - Manual (Page 67)

63
7.3.2 Error Codes
Error
code
Error Cause Recovery
0000 No error
8071 Invalid Command
The received data is not a command for the
instrument
8072 Parameter out of range The received parameter is out of range
8073
Device Not In Remote
Mode
The instrument is not in remote mode
8074 Device busy The instrument is doing a job.
8075 Filter wheel Filter wheel jammed. “reset” command.
8076
8077 Light bulb burned out Insufficient light level “reset” command.
8078
8079
8080
8081
8082
8083 Incubator error Incubator over heat.
8084 Plate carrier error-1 Plate carrier home sensor closed status error “reset” command.
8085 Plate carrier error-2 Plate carrier home sensor open status error “reset” command.
8086 Plate carrier error-3 Plate carrier jammed before reading “reset” command.
8087 Plate carrier Position Plate carrier jammed after reading “reset” command.
8088 Light level error
There is too big difference of light between
channels
“reset” command.
8089 Filter missing Light is exceeding allowable range “reset” command.
8090
Disagreement of security
status
The security status from P.C was disagreement.
8091 RS232C error RS232C hardware error
8092 A/D converter error Malfunction of A/D converter. “reset” command.
8093
Measurement stop by stop
key
The user input “stop” key during measurement. “reset” command.