D. incubation, Incubation – Bio-Rad Model 680 Microplate Reader Accessories User Manual

Page 39

Text mode
Original mode

d. Incubation

Incubation

In this screen, the user switches on/off the Incubator and sets the incubation
temperature. The temperature setting range is from 25.0 to 45.0 degrees.
The Up and Down arrow key moves the cursor to the desired parameter. The
Right arrow key chooses “Enable” or ”Disable” (ON/OFF) of Incubator. The
Numerical keys and the Decimal point key are used to input the incubation
temperature. The Enter key seals the selection and returns to the previous
screen.

NOTE:

The Incubator is optional. If the incubator is not installed and the "Incubation"
menu is chosen, a warning message will appear on the screen.

Set Incubation param

Incubator:

Enable

Temperature:

37.0