Bio-Rad Image Lab™ Software - Manual (Page 34)

2 | Setting Up the Instrument with Image Lab Software
34 | Gel Doc EZ Imaging System with Image Lab Software
When the tray has been initialized, the
next dialog box confirms this and lists the
applications you can run with the tray.
10. Remove the white tray from the
imager.
11. Click Next.
The wizard prompts you to initialize the
blue tray. If you do not have a blue tray,
click Skip and go to
Step 16 .
12. Make sure the blue tray is clean.
Then insert the tray into the imager and
close the door.