Bio-Rad Image Lab™ Software - Manual (Page 33)

Configuring the Imager
User Guide | 33
5. Click Next to initialize the UV tray.
A progress indicator reports the
initialization of the tray.
When the tray has been initialized, the
next screen confirms that the tray has
been found and initialized.
6. Remove the UV tray from the imager.
7. Click Next.
The wizard prompts you to initialize the
white tray. If you do not have a white tray,
click Next and go to
Step 12 .
8. Make sure the white tray is clean.
Then insert the tray into the imager and
close the door.
9. Click Next to initialize the white tray.
A progress indicator reports the
initialization of the tray.