Bio-Rad QX200™ AutoDG™ Droplet Digital™ PCR System - Manual (Page 40)

Instruction Manual | 33 32 | Automated Droplet Generator 32 | Automated Droplet Generator
Automated Droplet Generator Troubleshooting
4.2 Restarting a Run after a System Error
If the AutoDG Instrument encounters a system error during the run, it will stop the run and display an error
message requiring power cycling.
1. Unplug the AutoDG Instrument from the power supply.
2. Wait 30 sec and plug it back in.
Fig. 31. Example of error message displayed when the lid is left on the box of tips
placed in the left tip box holder. The run stops and an error message indicating the position
of the error displays on the touch screen.
Fig. 32. Example of System Error message. The run stops and power cycling the instrument is required.