Bio-Rad QX200™ AutoDG™ Droplet Digital™ PCR System - Manual (Page 34)

Instruction Manual | 27 26 | Automated Droplet Generator 26 | Automated Droplet Generator
Using the Automated Droplet Generator
To export the run log:
1. Touch the Run Log button on the home screen.
2. Remove the AutoDG Instrument’s side panel to the right of the touch screen. Slide the magnetic panel
down to release, then pull straight out to remove the panel.
3. Insert a USB key into the USB port on the side of the instrument.
4. Touch the Export All button at the bottom left of the screen.
5. Wait while the system exports the run logs to the USB key.
6. When finished, Run logs successfully exported will be displayed on the screen. It is now safe to remove
the USB key.
7. Replace the side panel.
If the USB key is not connected, the AutoDG Instrument will display USB key not found. Please insert it and
try again. Insert the USB key and touch Retry to proceed.