ADS Environmental Services FlowAlert QR 775011 A2 - Manual (Page 62)

Pressure Depth Sensor and Float Switch Installation 3-39
Gathering Parts and Supplies
Obtain the following supplies before installing the float switch(es)
to prevent costly delays.
Quantity Description ADS Part Number
1 FlowAlert monitor 6000-FAW or -FAL
1 monitor mounting bracket I40-0003
1 1 float switch (no pressure) 6000-0015-xx (xx
represents the
cable length in feet)
2 float switches (no pressure) 6000-0025-xx (xx
represents the
cable length in feet)
2 float switches and pressure pigtail 6000-0026-xx (xx
represents the
cable length in feet)
1 float switch and pressure pigtail 6000-0027-xx (xx
represents the
cable length in feet)
1 direct connection cable 5000-0601
10 anchor cable tie I05-0004
15 ¼- × 2 ¼-inch anchor bolt (with 7/16-
inch nut and washer)
I01-0002
Gathering Tools and Equipment
Gather the following tools for the installation:
 Battery-powered hammer drill with assorted bits – including
the following, at a minimum:
 3/8-inch x 4-inch (minimum length) masonry bit
 ¼-inch masonry bit (F35-0018)
 5/16-inch carbide-tipped drill bit (include smaller bits)