ADS Environmental Services FlowAlert QR 775011 A2 - Manual (Page 200)

In-5
M
magnetic antenna installation, 4-16
maintenance
float device, 7-2
monitor, 7-2
pressure depth sensor, 7-2
manhole
conditions, 3-4
mounting monitor to a rung, 6-12
mounting monitor to the rim, 6-3
mounting the monitor to the wall,
6-6
securing sensor cable, 3-36
modem selection, 5-20
monitor
activation, 5-24
activation logs, 5-47
battery voltage, 2-8
board, 2-4
checking the battery voltage, 7-4
collecting data, 5-37
communication
GPRS, 2-7
land line, 4-22
landline, 2-7
wireless, 2-7, 4-2
configuration, 5-2
creating a monitor location, 5-4
creating an installation table,
5-6
editing the float device, 5-13
editing the notification device,
5-18
editing the pressure device,
5-15
editing the RSSI device, 5-19
selecting devices, 5-11
connecting float switch, 3-42
connecting sensor, 3-42
connectors, 2-7
description, 2-4
GPRS, 4-2
inspection, 7-2, 7-3
installation, 6-1
mounting to a manhole ladder
rung manhole wall, 6-12
mounting to the manhole rim,
6-6
mounting to the manhole wall,
6-3
installing landline communication,
4-22
mounting lightning protection
module, 4-25
preparing telephone cable,
4-26
running cable between monitor
and service locations, 4-23
wiring lightning protection
module to network interface
box, 4-32
wiring telephone cable to
lightning protection module,
4-30
wiring telephone cable to
monitor, 4-28
installing the SIM card, 4-17
installing wireless communication,
4-2
maintenance, 7-2
obtaining diagnostic codes, 7-4
opening enclosure, 7-6
part numbers, B-1
power
battery pack, 2-8
processor board, 2-5
replacing battery pack, 7-6
setting communication parameters,
5-20
setting power saving parameters,
5-27
SIM card installation, 4-17
specifications, A-1
troubleshooting, 7-13
upgrading the firmware, 5-44
viewing diagnostic logs, 5-47