ADS Environmental Services FlowAlert QR 775011 A2 - Manual (Page 179)

7-14 ADS FlowAlert Manual
Problem Time on the monitor clock is incorrect.
Possible
Causes
Monitor clock may be faulty.
PC clock may read incorrect time.
Possible
Solutions
Verify the time on the PC clock and correct if
necessary.
Reactivate the monitor to enable the clock.
Collect the data from the monitor and replace monitor if
defective.
Problem You receive a Device Time Out message in Profile.
Possible
Cause
Circuit board may be faulty.
Possible
Solutions
Re-attempt communication with monitor.
Replace the monitor if defective.
Contact your regional ADS representative.
Problem Gap exists within the collected data.
Possible
Cause
Monitor time may be incorrect.
Monitor firmware or variable file may be corrupt.
Possible
Solutions
Check monitor time, and reset clock if necessary.
Attempt to collect data within the gap.
Contact your regional ADS representative.