Great Plains YP2425F-2470 Operator Manual - Manual (Page 81)

Great Plains Manufacturing, Inc. Table of Contents Index Adjustments 77
2014-07-14 Table of Contents Index 401-406M
Singulator Plus™ Meter Wheel Replacement
Choose the correct seed meter wheel for the type of
seed you will be using. Be sure to use the same wheel
type on all meters.
Meter Wheels Not Interchangeable:
Seed meter wheels for the 25 Series row units are made of a
green color material and are not interchangeable with the
other Great Plains seed meter wheels for other machines. Use
only green wheels in 25 Series row units.
1. Clean out meter. For more information, see “Meter
Removal” on page 75.
Refer to Figure 106
2.
Push in spring-loaded wheel retainer and make
1 ⁄
4
turn. Pull off wheel retainer and spring.
Refer to Figure 107
3.
Pry the seed meter wheel out about
1 ⁄
4
inch (6 mm)
using the tool stored under the walkboard, and spin
backward to clean out seeds from top pockets.
Note: If wheel is not free of all seed, wheel removal is
much more difficult, as pocketed seeds will shear
against meter parts.
Refer to Figure 108
4.
Remove seed meter wheel.
Figure 106
Singulator Wheel Retainer
22911
Figure 107
Pry Meter Wheel
22913
Figure 108
Remove Wheel
25274