Great Plains YP2425F-2470 Operator Manual - Manual (Page 122)

118 YP2425 & YP2425F Table of Contents Index Great Plains Manufacturing, Inc.
401-406M Table of Contents Index 2014-07-14
Coulter Blades
Replacement and alternate coulter blades include the
following. Order one blade per row unit.
For operations, see:
“Coulter Adjustments” on page 70.
Gauge Wheel Scrapers
When planting in moist or sticky soils, these scrapers are
useful in preventing build-up that might otherwise result
in shallow planting.
Order one part per wheel (2 per opener).
The scrapers mount on the bottom rear of the depth
wheel arm, using the existing bolt and lock washer. The
slot in the scraper is long enough to clear the lower
grease zerk, and allow adjustment as wheel and scraper
wear.
For operations, see:
“Adjusting Gauge Wheel Scrapers” on page 74.
Seed Meters
Seed meters are not standard in the base YP24
configuration. Normally, one or more sets are ordered
with the original planter. One set is factory-installed.
Meters are simple to change. Available models include
(part numbers are for a single row unit; each Singulator
Plus includes one seed wheel).
For operations, see:
“Seed Meter Setup and Adjustment” on page 75.
15 inch Turbo Packages Part Number
Fluted, 15 inch (50 flutes) 820-331C
Turbo, 15 inch (20 flutes) 820-327C
Straight, 14 inch 820-259C
25299
Wheel Scrapers Part Number
2
1 ⁄
2
in. (6.4cm) Gauge wheel scraper 404-194D
3 in. (7.6cm) Gauge wheel scraper 404-195D
4 in. (10.2cm) Gauge wheel scraper 404-196D
Meters Part Number
Singulator Plus 403-156K
12FP 12-Finger Pick-Up (30 inch) 403-158K
12FP 12-Finger Pick-Up (sunflower) 403-203K
6FP 6-Finger Pick-Up (Twin/20 inch) 403-169K
25298
25294