Great Plains YP2425F-2470 Operator Manual - Manual (Page 68)

64 YP2425 & YP2425F Table of Contents Index Great Plains Manufacturing, Inc.
401-406M Table of Contents Index 2014-07-14
Frame-Mounted Coulter Adjustments
Refer to Figure 75
Frame-mounted coulters may be run on-row or between
rows.
On-Row
If run on-row, or within 2 inches (5.1 cm) of the furrow,
adjust the shaft
to set the coulter depth to be the
planting depth or
1 ⁄
4
inches (6 mm) shallower.
Between Row (or Off-Row at least 2 inches)
At the shaft
, adjust the coulter depth for a running
depth of 4 to 4
1 ⁄
2
inches (10.1 to 11.4 cm) below
ground level . Refer to the Vantage I manual
(204-376M) for further adjustments.
Do not adjust the spring tension. It is factory pre-set.
Vantage I Fertilizer Adjustments
Refer to Figure 76
At the back plate
, adjust the tine height for a running
depth of 1 inch (2.5 cm) below ground level . Refer
to the Vantage I manual (204-376M) for further
adjustments.
4
Figure 75
Frame-Mount Coulter
25392
1
3
2
1 2
1
2
3
4
Figure 76
Vantage I Applicator
22951
3
2
1
1
2 3