Clover Electronics LCD2084 - Manual (Page 72)

Stand-alone DVR Instruction Manual
72
6-11.4. Copying the recorded data during replaying
The system, LCD2084 allows users to copy the recorded data during replaying.
▫ Start replaying (See section 6-10).
▫ Right-click on the replaying screen, then the COPY DATA screen will be displayed (See
[Fig. 6-52]).
▫ To set the starting time and date to copy, select the values (year/month/date window
and hour/minute/second) on the COPY DATA window by clicking the mouse, change the
values with the mouse’s wheel and click the mouse again on the changed values to
complete.
▫ Select each of channels (1 through 8 in red) or “A” in black for all the channels on the
COPY DATA window, and click on the SELECTED button to save.
[Fig. 6-52 Start Copy Time Setup window]
▫ To set the ending time and date to copy, right-click on the replaying screen again, and
the COPY DATA window that contains end time for copying will be displayed (See [Fig.
6-53]). Set the ending time and date to copy as described above.
▫ To select the COPY MODE, click on the GO TO COPY button (See [Fig. 6-53]), and the
COPY window (See [Fig. 6-47]) will be displayed. The time and date (starting time and
ending time) to copy can be changed on the COPY window as well (See section 6-11.2).