Clover Electronics LCD2084 - Manual (Page 147)

8. REMOTE HOST PROGRAM
147
8-4.6. COPY
It is possible to copy the recorded data from the DVR system to a client PC by using the Copy
button in [Fig. 8-13] in the Multi mode only (refer to section 8-4.9.2).
- Click the Copy button as shown in [Fig. 8-13] to copy the recorded data from the DVR system
to a PC, and then the Copy Time Setup Window will be displayed.
- The copy data will be saved in the Backup Files (Open Windows Explorer – click My
Computer – click Program Files – click DvrMaster folder – click Backup Files).
[Fig. 8-13 Copy mode]
- Check the Start Time and End Time on the upper part of the Copy Time Setup Window and
click the Edit ( ) button to set the Copy Start/End Time.
- Set the Copy Start/End Time in the Start/End Time Setting menu as shown in [Fig. 8-14] and
click the OK button. Copying Start/End time setup can be possible within a recoding time
extent.
- Select camera(s) you wish to copy by clicking “ALL” or camera channel number(s) in the Copy
Time Setup Window.
Copy Time Setup Window
Copy button