Clover Electronics LCD2084 - Manual (Page 118)

Stand-alone DVR Instruction Manual
118
▫ Pre-Alarm Time Setup
Allows you to record a section of video just prior to Sensor activation. Click the mouse on
the PRE in the SENSOR menu and choose one of the values among 1 through 30 seconds
in the pop-up table by clicking.
[Fig. 7-86 Pre-Alarm Time Setup button]
▫ Alarm Hold Time Setup
The system continues recording for the Alarm HOLD TIME and finishes the recording. Click
the mouse on the HOLD in the SENSOR menu and choose one of the values among 1
through 30 seconds in the pop-up table by clicking.
[Fig. 7-87 Alarm Hold Time Setup button]
▫ Spot Setup
If the “ON” is selected by clicking the mouse on the SPOT button in the SENSOR menu, a
full screen will display when the sensor is activated. If the “OFF” is selected, the full screen
won’t be displayed even though the sensor is activated.
[Fig. 7-88 Spot Setup button]
▫ Buzzer
Click the buzzer button in the SENSOR menu to turn the buzzer “ON” or “OFF”. If the “ON”
is selected, the buzzer will sound when a sensor is activated. If the “OFF” is selected, the
buzzer won’t sound.
[Fig. 7-89 Buzzer ON/OFF ]