Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 952)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
936 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Commands
The following standard addition commands can be selected:
￭ STDADD man
Standard addition with manual addition of the standard addition solu-
tion.
￭ STDADD dos
Standard addition with addition of the standard addition solution from
a dosing device.
￭ STDADD auto
Standard addition with automatic addition of the standard addition
solution from a dosing device in such a way that a constant potential
difference results.
5.6.4.3 MEAS pH
5.6.4.3.1 MEAS pH - Overview
Dialog window: Method ▶ MEAS pH ▶ Properties.. ▶ MEAS pH - 'Command name'
Command for potentiometric pH measurements with pH electrodes.
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 901, 902, 904, 905,
906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,
799
pH/Ion - Meter: 867
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command MEAS pH are configured on the fol-
lowing 4 tabs:
￭ General/Hardware
Parameters for devices, sensors and stirrers.
￭ Measuring parameters
Parameters for setting the measurement procedure.