Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1653)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Instruments
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1637
Digestion unit
Range
0% mapping of the input ... 100% mapping
of the input 'Mapping unit of the input or of
the calculated value'
Default value 0% mapping of the input 'Mapping unit of
the input or of the calculated value'
Free controller
Range
0% mapping of the input ... 100% mapping
of the input 'Mapping unit of the input or of
the calculated value'
Default value 0% mapping of the input 'Mapping unit of
the input or of the calculated value'
Actuating variable
Selection of the actuating variable out of all of the analog outputs of the
Controller output type.
Selection 'Port description'
'Port description'
Only analog output ports of the Controller output type can be selec-
ted.
Control task
Selection of the control task.
Selection Digestion unit | Free controller
Default value Digestion unit
Note
The control parameters adjust themselves on the basis of permanently
specified parameter sets when the control task is changed. They can
however be adjusted.