Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1259)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1243
Description
Freely selectable entry of a description of the result.
Input 1024 characters
[Save as template]
Open the dialog window Save result template in order to save the
result parameters as template for the creation of new results (see Chapter
5.6.8.2.6.2, page 1247).
5.6.8.2.5.2 Result - Monitoring
Tab: Method ▶ CALC ▶ Properties... ▶ [New] ▶ [Continue] ▶ Result - Overview
The parameters for monitoring the result are defined on this tab.
Result monitoring
Result monitoring
on | off (Default value: off)
The question of whether the result is within the defined limit values is
monitored while calculating the result during the determination if this
option is enabled.
Lower limit
Lower limit for the result.
Input 10 digits
Upper limit
Upper limit for the result.
Input 10 digits
Message
Message
The message defined here can be put out to different targets if the upper
limit is exceeded or if the lower limit is not reached. The text editor for
entering or changing the message is opened with or by double-click-
ing into the text field (see Chapter 2.5.2, page 93). The formula editor can
also be called up inside the text field (see Chapter 2.4, page 32).
Input Text (unlimited)