Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1698)

8.4 Manual control - Functions ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1682 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
8.4.6.2 Digital inputs
8.4.6.2.1 Digital inputs - Overview
Program part: Manual control
If in the device tree the branch Digital inputs is selected, then the status
of all connected digital inputs is shown in their physical order in the sub-
window for the graphical display.
Graphical display
Example:
DigIn_1_1_1
Emergency
stop
Status: ACTIVE
DigIn_1_1_2
General input
Status: ACTIVE
DigIn_1_1_3
Level detector
Status: INAC-
TIVE
DigIn_1_1_4
Leak detector
Status: INAC-
TIVE
DigIn_1_2_1
General input
Status: INAC-
TIVE
DigIn_1_2_2
General input
Status: INAC-
TIVE
DigIn_1_2_3
General input
Status: INAC-
TIVE
DigIn_1_2_4
General input
Status: INAC-
TIVE
8.4.6.2.2 Digital input
Program part: Manual control
If in the device tree a single digital input is selected, then the properties of
the input are displayed in the subwindow for functions/parameters.
In the subwindow for the graphical display, the status of the input is dis-
played.
Digital input
Port description
Display of the port description.