Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 377)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 361
Device:
Name of the device the sensor is connected to.
Measuring input:
Number of the measuring input to which the sensor is connected (+ desig-
nation iConnect for intelligent sensors).
Slope:
Electrode slope of the sensor used (in % for pH sensor or in mV for ISE).
E (0):
Electrode zero point of the sensor used (in mV only for ISE).
pH (0):
Electrode zero point of the sensor used (dimensionless for pH sensor).
c (blank):
Blank value of the ISE sensor used.
Cell constant:
Cell constant of the conductivity sensor used.
Calibration temperature:
Temperature during the calibration.
Calibration date:
Temperature during the calibration.
Calibration method:
Display of the method the calibration has been carried out with.
User:
Display of the user logged in during the calibration or who entered the
calibration data manually.
Measuring input
Display of the measuring input the calibration has been carried out with.
a ... e
Display of the calibration data a ... e (for the Thermoprobe only).
Common variable 'Name'
Information about the common variable used.