Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 160)

3.6 Subwindow Run ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
144 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
Determination parameters
Sample number
on | off (Default value: on)
Enable/disable the display of the field Sample number.
User
on | off (Default value: on)
Enable/disable the display of the field User.
Remarks
on | off (Default value: on)
Enable/disable the display of the field Remarks.
Statistics
on | off (Default value: on)
Enable/disable the display of the statistics fields.
Arrangement ID1…16
Note
The fields Sample size and Sample size unit are always displayed
next to one another in a line.
Selection 1 Column | 2 columns
Default value 1 Column
1 Column
If this option is selected, then the sample identifications ID1…ID16
are shown in single columns.
2 columns
If this option is selected, then the sample identifications ID1…ID16
are shown in double columns.
3.6.3.9.3 Properties - Edit
Dialog window: Workplace ▶ Run ▶ Single determination ▶ Properties Run win-
dow ▶ Properties - Single determination
Definition of the sample data which is to be applied automatically for the
next single determination.