Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1250)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1234 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
5.6.7.10 RLS DEV
5.6.7.10.1 RLS DEV - Overview
Dialog window: Method ▶ RLS DEV ▶ Properties... ▶ RLS DEV - 'Device name'
Command to release a device for using it in other parallel running meth-
ods. It removes the reservation made by the current method.
Devices
This command can be executed with the following devices:
Sample Processor: 730, 774, 778, 789, 814, 815, 864, 874
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
Parameters
The parameters for the command RLS DEV are configured in the follow-
ing dialog window:
￭ RLS DEV - Properties
Command variables
The following command variables are generated in the method run by the
command RLS DEV and can be used in formulas under the designation
'Command name.Variable designation':
Identifi-
cation Description
.BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
never been started
.FIN Command status; 1 = Command has ended at least
once, 0, invalid (variable not available) = Command
has never ended