DJI Phantom 2 Vision User Manual User Manual

Phantom 2 vision, User manual v1.6

Table of contents

Document Outline

Index
In the Box
Symbol Legend
Watch the Quick Start Videos
Downloading the DJI VISION App
1 Attaching the Propellers
- 1.1 Introduction
- 1.2 Assembly
- 1.3 Removing the Propellers
- 1.4 Notes
2 Installing the Range Extender and Mobile Device Holder
- 2.1 Installing the Range Extender
- 2.2 Installing the Mobile Device Holder
3 Preparing the Remote Control
- 3.1 The Remote Control
- 3.2 Power on the Remote Control
- 3.3 Remote Control Power Indicator Status Information
- 3.4 Antenna Orientation
- 3.5 Remote Control Operation
- 3.6 Link between the Remote Control and Receiver
  - Link Procedures
  - Link Indicator
- 3.7 Compliance Version Configuration
4 Preparing the Range Extender
- 4.1 The Range Extender
- 4.2 Function Description
- 4.3 Powering on the Range Extender
- 4.4 How to Bind the Camera & Range Extender
5 Preparing the Camera
- 5.1 The built-in camera
- 5.2 Main Functions
- 5.3 Upgrading the Firmware of Camera
6 Downloading and Installing the DJI VISION App
- 6.1 Download and Install
- 6.2 Register & Login
7 Preparing the Flight Battery
- 7.1 Intelligent Battery and Charger Instructions
- 7.2 Charging Procedures
- 7.3 Install the Battery
- 7.4 Battery Usage
  - Description of the Battery Level Indicator
- 7.5 Correct Battery Usage Notes
8 PHANTOM 2 Aircraft
- 8.1 The Aircraft
- 8.2 Built-in Flight Control System Instructions
- 8.3 LED Flight Indicators Description
9 Connecting to the Camera
- 9.1 Camera Connection Procedures
10 Calibrating the Compass
- 10.1 Calibration Warnings
- 10.2 Calibration Procedures
- 10.3 When Recalibration Is Required
11 Flight
- 11.1 Flying Environment Requirements
- 11.2 Starting/Stopping the Motors
- 11.3 Takeoff/Landing Procedures
- 11.4 Failsafe Function
- 11.5 Low Battery Level Warning Function
  - Low Battery Level Warning on the DJI VISION App
- 11.6 Flight Limits
12 Using DJI VISION App
- 12.1 DJI VISION App Main Menu
- 12.2 Camera Page
  - Basic Use
  - Camera Settings
- 12.3 Album Page
  - Camera SD CARD Album
  - Mobile Device Album
- 12.4 News Page
- 12.5 Settings Page
- 12.6 Ground Station
  - 12.6.1 Ground Station GUI
  - 12.6.2 Using Ground Station
13 Assistant Installation and Configuration
- 13.1 Installing Driver and PHANTOM 2 VISION Assistant
- 13.2 Using the PHANTOM 2 VISION Assistant on a PC
- 13.3 Firmware Upgrade of the PHANTOM 2 VISION
- 13.4 PHANTOM RC Assistant Description
14 Troubleshooting (FAQ)
15 Appendix
- LED Flight Indicator Status
- Specifications