DJI Phantom 2 Vision User Manual User Manual
Page 27

©2014 DJI. All Rights Reserved.
27 |
LED Flight Indicators Description
Normal status
LED flight indicators
Notes
Power On Self-Test
----
Warming Up
Aircraft cannot take off.
Ready to Fly
Slow blinking green.
Ready to Fly (non-GPS)
Slow blinking yellow.
Abnormal status
LED flight indicators
Remote Control Signal Lost
Fast blinking yellow. Refer to the
Low Battery Capacity Warning
Slow blinking red.
Critical Low Battery Capacity Warning
Fast blinking red.
Not Stationary or Sensor Bias is too big
Keep aircraft stationary or perform
IMU calibration.
Error*
Cannot fly.
Compass Needs Calibration
Refer to the
(1) The aircraft should be kept stationary on level ground before takeoff.
(2) Make sure the aircraft’s status is in Ready to Fly or Ready to Fly (non-GPS) mode before takeoff.
(3) If an error occurs (LED is solid red), please connect to the PHANTOM 2 VISION Assistant for more
detailed information.
NO.
Errors
Operation
1
IMU calibration is required.
Calibrate within the Assistant.
2
IMU is abnormal.
Should be repaired.
3
Compass is abnormal.
Should be repaired.
4
Remote Control’s mid-point is set
abnormally.
Refer to the
for details.