Regaining control during failsafe procedure, Failsafe on the dji vision app, 5 low battery level warning function – DJI Phantom 2 Vision User Manual User Manual
Page 34: Attery, Evel, Arning, Unction

©2014 DJI. All Rights Reserved.
34 |
home point is used to calculate the horizontal distance between you and the aircraft, the distance will be
displayed on the DJI VISION App.
Regaining Control During Failsafe Procedure
Position of Switch S1
Position-1
Position-2
Position-3
How to regain control
When the S1 switch is switched to Position-1,
toggle the S1 switch to any other position once to
regain control. If remote control’s signal is
recovered, control is returned back to the pilot.
Regain control as soon as signal
is recovered.
Failsafe on the DJI VISION App
The DJI VISION App will provide information during Failsafe.
Control Signal Lost Indicator
Going Home Indicator
Refer to the
Using DJI VISION App (Page 42)
for details.
11.5 Low Battery Level Warning Function
If the DJI smart battery is depleted to a point that may affect the safe return of the aircraft, the low battery level
warning notifies users to take action. Users are advised to land the aircraft immediately when they observe
these warnings. The thresholds for these warnings are automatically determined based on the current aircraft
altitude and its distance from the Home point. Details of the battery level warning are listed below: