DJI Phantom 2 Vision User Manual - Manual (Page 31)

©2014 DJI. All Rights Reserved. 31 |
11 Flight
11.1 Flying Environment Requirements
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Before your first flight, please allow yourself some flight training (Using a flight simulator to
practice flying, getting instruction from an experienced person, etc.).
DO NOT fly in bad weather, such as rain or wind (more than moderate breeze) or fog.
The flying field should be open and void of tall buildings or other obstacles; the steel structure
within buildings may interfere with the compass.
Keep the aircraft away from obstacles, crowds, power lines, trees, lakes and rivers etc.
Try to avoid interference between the remote control and other wireless equipment. (No base
stations or cell towers around)
The flight control system will not work properly at the South Pole or North Pole.
All parts must be kept out of the reach of children to avoid CHOKING HAZARDS; if a child has
accidentally swallowed any part, you should seek immediate medical assistance.
11.2 Starting/Stopping the Motors
A Combination Stick Command (CSC) is used to start the motors instead of simply pushing the throttle stick up.
This is a safety precaution to prevent the motors from accidentally spinning up. Push both sticks to their bottom
corners as indicated in the diagram below to start the motors. Once the motors have spun up, release both sticks
simultaneously. The same combination stick command (CSC) is used to stop the motors.
11.3 Takeoff/Landing Procedures
1.
2.
3.
4.
5.
6.
Start by placing the PHANTON 2 VISION on the ground with the battery level indicator facing you.
Power on the remote control.
Power on the range extender.
Switch the camera to the “WIFI ON” position.
Power on the aircraft by turning on the intelligent battery, refer to the Battery Usage (Page 24) for details.
Connect the mobile device to the PHANTOM 2 VISION and then run the DJI VISION App to enter the
camera preview page.