DJI Phantom 2 Vision User Manual User Manual

Phantom 2 vision, User manual v1.6

Text mode
Original mode

PHANTOM 2 VISION

User Manual V1.6

October, 2014 Revision

Congratulations on purchasing your new DJI product. Please thoroughly read the entire contents of this manual to

fully use and understand the product.

It is advised that you regularly check the PHANTOM 2 VISION’s product page at

www.dji.com

which is

updated on a regular basis. This will provide services such as product information, technical updates and manual

corrections. Due to any unforeseen changes or product upgrades, the information contained within this manual is

subject to change without notice.

If you have any questions or concerns regarding your product, please contact your dealer or DJI Customer Service.

Table of contents

Document Outline

Index
In the Box
Symbol Legend
Watch the Quick Start Videos
Downloading the DJI VISION App
1 Attaching the Propellers
- 1.1 Introduction
- 1.2 Assembly
- 1.3 Removing the Propellers
- 1.4 Notes
2 Installing the Range Extender and Mobile Device Holder
- 2.1 Installing the Range Extender
- 2.2 Installing the Mobile Device Holder
3 Preparing the Remote Control
- 3.1 The Remote Control
- 3.2 Power on the Remote Control
- 3.3 Remote Control Power Indicator Status Information
- 3.4 Antenna Orientation
- 3.5 Remote Control Operation
- 3.6 Link between the Remote Control and Receiver
  - Link Procedures
  - Link Indicator
- 3.7 Compliance Version Configuration
4 Preparing the Range Extender
- 4.1 The Range Extender
- 4.2 Function Description
- 4.3 Powering on the Range Extender
- 4.4 How to Bind the Camera & Range Extender
5 Preparing the Camera
- 5.1 The built-in camera
- 5.2 Main Functions
- 5.3 Upgrading the Firmware of Camera
6 Downloading and Installing the DJI VISION App
- 6.1 Download and Install
- 6.2 Register & Login
7 Preparing the Flight Battery
- 7.1 Intelligent Battery and Charger Instructions
- 7.2 Charging Procedures
- 7.3 Install the Battery
- 7.4 Battery Usage
  - Description of the Battery Level Indicator
- 7.5 Correct Battery Usage Notes
8 PHANTOM 2 Aircraft
- 8.1 The Aircraft
- 8.2 Built-in Flight Control System Instructions
- 8.3 LED Flight Indicators Description
9 Connecting to the Camera
- 9.1 Camera Connection Procedures
10 Calibrating the Compass
- 10.1 Calibration Warnings
- 10.2 Calibration Procedures
- 10.3 When Recalibration Is Required
11 Flight
- 11.1 Flying Environment Requirements
- 11.2 Starting/Stopping the Motors
- 11.3 Takeoff/Landing Procedures
- 11.4 Failsafe Function
- 11.5 Low Battery Level Warning Function
  - Low Battery Level Warning on the DJI VISION App
- 11.6 Flight Limits
12 Using DJI VISION App
- 12.1 DJI VISION App Main Menu
- 12.2 Camera Page
  - Basic Use
  - Camera Settings
- 12.3 Album Page
  - Camera SD CARD Album
  - Mobile Device Album
- 12.4 News Page
- 12.5 Settings Page
- 12.6 Ground Station
  - 12.6.1 Ground Station GUI
  - 12.6.2 Using Ground Station
13 Assistant Installation and Configuration
- 13.1 Installing Driver and PHANTOM 2 VISION Assistant
- 13.2 Using the PHANTOM 2 VISION Assistant on a PC
- 13.3 Firmware Upgrade of the PHANTOM 2 VISION
- 13.4 PHANTOM RC Assistant Description
14 Troubleshooting (FAQ)
15 Appendix
- LED Flight Indicator Status
- Specifications