DJI Phantom 2 Vision User Manual User Manual

Page 16

16 |

Power on the camera and range extender. Note: (Place the camera power switch to the ‘WIFI ON’

position).

Approximately 30 seconds later, press the reset button on the range extender with a thin object until the

Wi-Fi signal indicator turns off. The range extender will then restart automatically.

Approximately 30 seconds later, the Wi-Fi signal indicator should start to blink green, which indicates the

range extender is now ready to be bound.

Find and select the Phantom_xxxxxx via the Wi-Fi list on the mobile device to connect the range extender.

(Fig.1) Run the DJI VISION App->Settings->General->Binding. (Fig.2) Select ‘Scan the QR Code’ to scan

the camera QR code on the product packaging. (Fig.3) Get the camera SSID (E.g. FC200_0xxxxx) and the

MAC address, select the tick

on the top right corner. The range extender should automatically

restart. The binding procedure is now complete.

Fig.1 Fig.2

（QR code is only for example.）

Reset Button