Brandmotion 1008-9527-V2 - Manual (Page 9)

INSTALLATION INSTRUCTIONS
9527 Instructions 6-18-12 F series-1 (1).doc 9 of 38
Section 6: Interior Harness Installation
25. Remove driver side dash panel end cap
by pulling away weather-stripping and pull
end panel to release clips from the dash
panel (Figure 16).
Figure 16
26. Remove driver side A-pillar by pulling
with hands to release clips from sheet metal
(Figure 17).
Figure 17
27. Remove both sun visor anchors (either
side of roof console) by removing one screw
with a Phillips screw driver (Figure 18).
Figure 18
28. Remove roof console with hands to
remove the clips from the sheet metal. Then
remove both connectors (Figure 19).
Figure 19