Brandmotion 1008-9527-V2 - Manual (Page 21)

INSTALLATION INSTRUCTIONS
9527 Instructions 6-18-12 F series-1 (1).doc 21 of 38
Section 9: Supplied Mirror Installation
52. Plug the 16-pin connector from the
supplied interior harness into the supplied
mirror (Figure 33).
Figure 33
53. Install the supplied mirror on the
mounting button and slide it downwards.
Secure by tightening the T20 Torx screw to
1.8 Nm (16 lb-in.), while not exceeding 2.2
Nm (19.5 lb-in.).
54. If equipped, reinstall modified Rain
Sensor from Section 4.