Brandmotion 1008-9527-V1 - Manual (Page 9)

INSTALLATION INSTRUCTIONS
9527 Ford Flex Instructions 7-27-12.doc 9 of 18
Section 5: Interior Harness Installation
42. Remove driver side dash panel end cap by
pulling away weather-stripping. Pry end panel to
release clips from the dash panel.
43. Remove both sun visor anchors (either side
of roof console) by removing two bolts with a
T15 socket.
44. Loosen driver side A-pillar molding with
hands and then remove the driver side lower
kick panel.
45. Loosen headliner at top of windshield with
hands to remove the clips from the sheet metal.
Then route supplied interior harness towards
mirror mount (Figure 18).
Figure 18
46. Route the supplied interior harness down
the driver side A-pillar (Figure 19).
Figure 19