Brandmotion 1008-9527-V1 - Manual (Page 18)

INSTALLATION INSTRUCTIONS
9527 Ford Flex Instructions 7-27-12.doc 18 of 18
Section 10: Reference – Supplied Harness Pinouts
6-pin connector pinouts
PIN
#
FUNCTION
CAMERA
HARNESS
COLOR CHASSIS
HARNESS
COLOR INTERIOR
HARNESS
COLOR
1 Video (+) White White Gray/Dark Blue
2 Shield Blue Blue White
3 Reverse Green Green Green
4 Video (-) Brown Brown Gray/Orange
5 Ground Black Black Black
6 Ignition Red Red Pink
16-pin connector pinout
PIN Circuit Description Wire Color
1 Not Used N/A
2 Not Used N/A
3 Not Used N/A
4 Not Used N/A
5 Dual Outside Drive EC (+) Orange
6 Camera NTSC Video (+) Gray/Blue
7 Camera NTSC Video (-) Gray/Orange
8 Vehicle Ground (-) Black
9 Reverse Input (Active High) Green
10 Not Used N/A
11 Not Used N/A
12 Not Used N/A
13 Ignition (Run Only Line) Pink
14 Not Used N/A
15 Not Used N/A
16 Dual Outside Drive EC (-) White
Loose wires provided in the
Supplied Wire Harness
Function Wire color
Ground (-) Black
Reverse signal 12V Green
Ignition 12V Pink
Compass (+) Red
Compass (-) Yellow
Auto dimming (+) Orange
Auto dimming (-) White
NOTE :
Pin cavities are numbered on the
back side of the 16-pin connector.
Additionally, Brandmotion
identifies Pin 1 with a white mark.