Brandmotion 1008-9527-V1 - Manual (Page 7)

INSTALLATION INSTRUCTIONS
9527 Ford Flex Instructions 7-27-12.doc 7 of 18
Section 3: Chassis Harness Installation continued
26. Pull down rear edge of headliner slightly to
route chassis harness inside and towards the
driver side D-pillar.
27. Remove driver side C-pillar trim panel with a
trim removal tool (Figure 14).
Figure 14
28. Partially unclip driver side lower quarter
panel trim.
29. Route chassis harness forward taking care
not to bind the cable when replacing the trim.
30. Remove the driver side rear door sill plate
with a trim tool.
31. Loosen driver side rear door weather strip.
32. Remove 5.5mm screw and loosen driver
side lower C-pillar trim.
33. Loosen driver side lower B-pillar trim panel
with hands.
34. Continue routing chassis harness forward,
taking care not to pinch wiring between trim
pieces.
35. Remove the driver side front door sill plate
with a trim tool.
36. Route remainder of chassis harness towards
dash.