Rockwell Automation MPAS Integrated Linear Stages - Manual (Page 78)

78 Rockwell Automation Publication MP-UM001D-EN-P - September 2013
Appendix A Dimensions
Figure 18 - MP-Series Linear Stages (MPAS-A/B9xxx1/2-VxxSxA)
281
(11.06)
46.8
(1.84)
8.5
(0.33)
38.3
(1.51)
172.2
(6.78)
249
(9.8)
30.0
(1.18)
105.4
(4.15)
5.60
(0.22)
239
(9.41)
130.8
(5.15)
(4X) M8 x 1.25-6H
(4X)
Ø 6.8 (0.27)
44.2
(1.74)
12.0 (0.47)
45.2 (1.78) Thru
265.8
(10.46)
25.4
(1.0)
56.4
(2.22)
264.7
(10.42)
25.4
(1.0)
281
(11.06)
46.8
(1.84)
8.5
(0.33)
38.3
(1.51)
172.2
(6.78)
249
(9.8)
30.0
(1.18)
105.4
(4.15)
5.60
(0.22)
239
(9.41)
130.8
(5.15)
(4X) M8 x 1.25-6H
(4X)
Ø 6.8 (0.27)
44.2
(1.74)
12.0 (0.47)
45.2 (1.78) Thru
265.8
(10.46)
25.4
(1.0)
56.4
(2.22)
264.7
(10.42)
25.4
(1.0)
Dimensions are in mm (in.)
Detail A
(2X) Ø 5.5 (0.22) Through
Pilot Hole
120 (4.72)
Toe Clamp/Tee Nut Spacing
Ø 13.0 (0.51) Through
Access Point to Lubricate
Ball Screw Nut
See Detail A
25.4 (1.0)
Mechanical Overtravel 25.4 (1.0)
Mechanical Overtravel
Travel
(4X) 9/16-12 UNC Through (2 per end cap)
Access point for lubricating linear bearings.
Provision to use lifting hooks (not provided).
Ground Screw
M5 x 0.8-6H
Tee Nut
Mount to base by using
M6 x 1.0 hardware (optional accessory).
6.5 (0.26)
Depth, max
(S) Stage Length
(OAL) Overall Length
Toe Clamp is standard for
covered stages. Mount to base
by using M6 x 1.0 socket cap screw.
0.025 / 300 x 300 (0.001 / 12.0 x 12.0)
Flatness requirement for the surface
that this stage is being mounted to.
The overall length (OAL) is measured to
the head of the screws that secure the
motor endcap.
Cat. No.
MPAS-
S OAL
(5 mm/rev)
(1)
OAL
(20 mm/rev)
(2)
Cat. No.
MPAS-
S OAL
(5 mm/rev)
(1)
OAL
(20 mm/rev)
(3)
mm (in.) mm (in.) mm (in.) mm (in.) mm (in.) mm (in.)
A/B9012x-VxxSxA 461 (18.1) 557 (21.9) 582 (22.9) A/B9054x-VxxSxA 881 (34.7) 977 (38.5) 1002 (39.5)
A/B9018x-VxxSxA 521 (20.5) 617 (24.3) 642 (25.3) A/B9066x-VxxSxA 1001 (39.4) 1097 (43.2) 1122 (44.2)
A/B9024x-VxxSxA 581 (22.9) 677 (26.6) 702 (27.6) A/B9078x-VxxSxA 1121 (44.1) 1217 (47.9) 1242 (48.9)
A/B9030x-VxxSxA 641 (25.2) 737 (29.0) 762 (30.0) A/B9090x-VxxSxA 1241 (48.8) 1337 (52.6) 1362 (53.6)
A/B9036x-VxxSxA 701 (27.6) 797 (31.4) 822 (32.4) A/B9102x-VxxSxA 1361 (53.6) 1457 (57.4) 1482 (58.4)
A/B9042x-VxxSxA 761 (29.9) 857 (33.7) 882 (34.7)
(1) If MPAS-A/B6xxx-V05S4A linear stage with brake, add 39 mm (1.53 in.) to dimension OAL.
(2) If MPAS-A/B6xxx-V20S4A linear stage with brake, add 39 mm (1.53 in.) to dimension OAL.
(3) If MPAS-A/B6xxx-V20S4A linear stage with brake, add 39 mm (1.53 in.) to dimension OAL.