Rockwell Automation MPAS Integrated Linear Stages - Manual (Page 15)

Rockwell Automation Publication MP-UM001D-EN-P - September 2013 15
Safety Chapter 1
As a minimum, refer to the following IATA Dangerous Goods Regulations:
• Subsection 1.5: Training
• Subsection 3.9.2.2: Classification as Magnetized Material
• Subsection 4.2: Identification as UN 2807, Magnetized Material, Class 9,
Packing Instruction 902
• Subsection 7.1.5: Marking
• Subsection 7.2: Labeling
• Subsection 7.4.1: Magnetized Material Label
• Section 8: Shipper's Declaration for Dangerous Goods
When shipped via ground in the United States, these products are not considered
a U.S. D.O.T. Hazardous Material and standard shipping procedures apply.
Standards Standards and requirements applicable to this product include, but are not
limited to, the following:
· ANSI/RIA R15.06, Industrial Robots and Robot Systems Safety
Requirements - Teaching Multiple Robots
· ANSI/NFPA 79, Electrical Standard for Industrial Machinery
· CSA/CAN Z434, Industrial Robots and Robot Systems- General Safety
Requirements
· EN60204-1, Safety of Machinery. Electrical Equipment of Machines
· UL 1740, UL Standard for Safety Industrial Robots and Robotic
Equipment
Motor Model Identification The nameplate on ball screw driven linear stages lists the specific MP-Series servo
motor model used.