Rockwell Automation 6186M-xxxx Industrial Performance Monitors User Manual - Manual (Page 59)

Rockwell Automation Publication 6186M-UM002B-EN-P - March 2012 59
Appendix
B
Video Cables
You can use the HD-15 and DVI cables included with your monitor to connect
the monitor to the host computer.
HD-15 Video Connector The HD-15 video cable 1.83 m (6 ft) is equipped with a conventional HD-15
connector at each end.
The illustration shows the connector looking into the pin end of a male
connector or the solder term end of a female connector.
The Standard DVI Video Cable table provides the pin numbers and
corresponding pin assignments for the HD-15 video connector with the
DDC2B capability.
Table 28 - Standard HD-15 Video Cable
Monitor
(female) Signal Description Host
(male) Monitor
(female) Signal Description Host
(male)
1 Red Video 1 9 VGA Power 9
2 Green Video 2 10 Not Used 10
3 Blue Video 3 11 Not Used 11
4 Not Used 4 12 DDC Data 12
5 Hot Plug Detect 5 13 Horizontal Sync 13
6 Red Video Ground 6 14 Vertical Sync 14
7 Green Video Ground 7 15 DDC Clock 15
8 Blue Video Ground 8
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15