Rockwell Automation 6186M-xxxx Industrial Performance Monitors User Manual - Manual (Page 50)

50 Rockwell Automation Publication 6186M-UM002B-EN-P - March 2012
Chapter 3 Display Configuration
Tool Menu
Table 19 - Tool Menu, OSD Submenu, and Rotation Submenu Descriptions
Factory
Reset
Back OSD
Standard
Mirror
Left
Right Back
Back
Rotation
Timer
Horizontal
Position
Vertical
Position
OSD Submenu Rotation Submenu
180 Degree
Tool Functions Description OSD Functions Description Value Range
OSD Accesses the OSD submenu. Timer Sets a maximum idle time for exiting the OSD
system if input is not received. 0…60 seconds in
increments of 1 second
Factory Reset Resets all OSD settings to factory defaults. Horizontal Position Adjusts the horizontal position of the OSD menu. 0…100
Back Returns to the OSD main menu. Vertical Position Adjusts the vertical position of the OSD menu. 0…100
Rotation Adjusts the direction of the OSD menu. See submenu below
Back Returns to the Tools menu.
Rotation Functions (1)
(1) Rotation functions apply to display but not the monitor. See installation guidelines on page 20 for monitor orientation.
Description
Standard Images are upright and text is read left-to-right.
Mirror Images and text are reversed (backwards).
Left View moves from bottom-to-top of monitor.
Right View moves from top-to-bottom of monitor.
180 Degree Images and text are reversed and upside down.
Back Returns to the Tools menu.
IMPORTANT All saved settings are lost when
you reset OSD settings to the
factory defaults.