Rockwell Automation 6186M-xxxx Industrial Performance Monitors User Manual - Manual (Page 30)

30 Rockwell Automation Publication 6186M-UM002B-EN-P - March 2012
Chapter 2 Installing the Monitor
Bench or Tabletop Mounting Use the optional adapter, catalog number 6189V-MBA, to mount your monitor
on a bench or tabletop arm.
Required Tools
You need the bench or tabletop adapter and a #2 Phillips screwdriver.
Mounting Guidelines
Observe these guidelines when installing the monitor on an arm:
• The mounting surface and the mounting arm must be strong enough to
support both the monitor and the mounting hardware.
• The interface between the arm and the monitor must meet VESA
FPMPMI 100 mm standards.
• The mounting location must provide adequate clearance for positioning
and moving the adjustable unit and routing cables.