General osd menu navigation guidelines, Osd menus, Osd main menu – Rockwell Automation 6186M-xxxx Industrial Performance Monitors User Manual User Manual
Page 45
Rockwell Automation Publication 6186M-UM002B-EN-P - March 2012
45
Display Configuration
Chapter 3
Change Monitor Settings
with the On-screen
Display (OSD)
Use the control buttons and On-screen Display (OSD) to modify your monitor’s
settings while viewing the ScreenSet setup screen. See the Perform Automatic
Setup section.
The OSD contains similar menu functions for each monitor. The menus are icon
driven.
General OSD Menu Navigation Guidelines
Adjust the Monitor by Using Control Keypad on page 43
for where the
Menu/Return and arrow buttons are located. See any of the six OSD main menu
tabs starting on
for where the Exit and Back buttons are located.
· Press the Menu/Return
button to do the following:
– Open the OSD main menu.
– Activate the highlighted function.
– Activate a highlighted sub-function.
· Press the arrow
buttons to do the following:
– Move between the function icons.
– Make your changes.
– Select the sub-function if an icon has more than one sub-button.
· As you move from one function to the other, the function menu changes
to represent the correct icon.
· Press the Back
button once to return to the OSD main menu where
you can select another function.
· Press the Exit button
to exit the OSD main menu.