Rockwell Automation 6186M-xxxx Industrial Performance Monitors User Manual - Manual (Page 44)

44 Rockwell Automation Publication 6186M-UM002B-EN-P - March 2012
Chapter 3 Display Configuration
Use the Auto Adjust Control
When the Auto Adjust button is pressed, the monitor samples the input
video signal and accurately adjusts the screen size, position, and phasing. This
function works with most screens using reasonable video content, but Rockwell
Automation ships a ScreenSet monitor set-up utility on a CD to display the best
possible image for setup.
1. Insert the Accessories CD, provided with the monitor, into your
computer’s CD-ROM drive.
2. Locate and start the ScreenSet utility named ScreenSet.exe.
3. Press the Auto Adjust
button.
The auto adjustment display appears. Your screen may flicker during the
Auto Setup process. When the auto adjustment is complete, your monitor
will be properly adjusted.
IMPORTANT The Auto Adjust function applies only to a VGA analog video source. It has no
effect on a DVI digital video source.
IMPORTANT The ScreenSet monitor set-up utility is designed for only Windows 32-bit
and 64-bit operating systems.
TIP A computer switches through several video modes while starting. The
monitor stores set-up information for each video mode. If you have trouble
reading the display during the starting video modes, you can also press the
Auto Adjust
button during that time.