Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 86)

Publication 2707-PM002B-EN-P
12-8 Entering MicroView Configuration Data
To edit the screen text:
You can edit the screen text from the second security screen. The
default text is shown in the example.
1. Press [F7] to clear the display window.
2. Enter the new message of up to 21 characters.
3. Press [F9] to save the new message.
4. Press [Esc] to exit the Special Security Screen You are returned
to the Configuration – Option Selection menu.
IMPORTANT
You cannot link the Special Security Screen. This
screen only restricts access to the Mode Menu and is
not assigned a screen number.
IMPORTANT
The security screen protects against unauthorized
entry into the (MODE MENU) of the MicroView.
Keep a record of all security codes used. If the user
forgets the security code and the DPS application
program is not available, there will be no way for the
user to place the MicroView into the program mode
in order to change or update an application.