Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 59)

Publication 2707-PM002B-EN-P
Creating Data Entry Screens 8-3
Creating a Data Entry
Screen The entry register data field may be inserted anywhere on the screen,
however, no text may follow the data entry field. This means that you
must insert any text or a display field before the data entry field. The
number of character positions required for the data entry field
depends upon the register information you provide.
To create a data entry screen:
1. Select Screen Builder from the Edit File – Option Selection
menu.
The Screen Builder for the main menu (screen #1) is displayed.
2. Press [F8] and enter the display screen # or press [F6] for the
next unused screen.
You are then prompted to choose a screen type.
3. Select Data Entry Screen and press [Return].
The Screen Builder for a data entry screen appears.