Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 100)

Publication 2707-PM002B-EN-P
14-2 Transferring / Printing Application Files
Downloading an
Application This section shows how to download an application from a computer
running DPS software to the MicroView.
1. Apply power to the MicroView and set the MicroView to the
Program Mode.
•
Press the[MODE] key
•
[3] for Special,
•
[3] for Program,
•
[1] for Upload (Download).
2. The following message will appear in the window of the
MicroView.
If you do not see this message, consult the MicroView User
Manual (Publication No. 2707-UM005B-EN-P) for information on
how to access the Program Mode.
3. On your computer, move to the /MDPS subdirectory where the
software resides.
C:\MDPS>
4. Type dps and press [Return] to start the program.
C:\MDPS>dps [Return]
5. Specify whether you are using a color monitor. Enter [Y] or [N].
You will not see this prompt if a monitor was selected during
installation.
The startup screen displays:
6. Press any key to continue.
Programming Mode
“MENU” to Exit