Rockwell Automation 2707-NP2 MICROVIEW SOFTWARE PROGRAMMING MANUAL - Manual (Page 27)

Publication 2707-PM002B-EN-P
Designing Microview Applications 3-7
Description of Example
Application Pump/Tank Levels
When Pump/Tank Levels is selected from the Main Menu, a Sub-Menu
displays two new choices (East Pump/Tank and West Pump/Tank).
Selecting either of these Sub-Menu items allows you to display pump
and tank information for the East or West systems.
Pump Control
Allows you to enter new pump setpoints to be entered. A security
code is required to access the Data Entry screens.
Data Entry screens use data from the controller (% Full & CFM) to
display this information along with a prompt to enter a new setpoint.
When a new setpoint is entered, the value is checked to verify that it
is within the programmed limits. If the value is within the entry limits,
the number is then scaled to engineering units and sent to the
controller. If the value is outside the limits, an error message informs
you of the valid range. You can then enter another value.
Appendix B contains worksheets for designing both MicroView
applications. Both application layout and screen design worksheets
are provided.